Address: Room 301, No 14 Alley 658, Guyiyuan Road, Nanxiang town, Jiading district, Shanghai
Contact person: Pu yunlong
Mobile: +86-13701683329, +86-13916039332
Tel: +86-21-59125358
Fax: +86-21-69123958
Sodium Alginate-P Series is the thickener recommending only for the polyester fabric developed adding special additives to provide the excellent printing effect on the synthetic fiber.
The printing using SODIUM ALGINATE sereis as thickener gives you a very brilliant colors, and sharp-outline on the fabrics with good wash-ability. For the very thin fabrics, P-10 is recomended and for the thicker fabrics, it is recommended use P-8, P-6. in sequence to get the best result.
Specification
| Color: | Beige Powder |
| Chemical Base: | Sodium Alginate and phosphate salt and so on |
| Moisture: | Approx 12% |
| PH: | 6.8 |
| Ionic: | Anion |
| Viscosity: |
P-6(6%) 50,000 CPS±3,000 CPS(LVT) |
Printing stock solution
| Series | P-6 | P-8 | P-10 |
| Water | 94% | 92% | 90% |
| Sodium Alginate | 6% | 8% | 10% |
CELLU GUM Sodium Alginate-P Series will be ready for use approximately 5-6 hours after the product is added to water under satisfactory agitation. According to the purpose of textile printing, the acid and various chemical additives are differently added to the stock paste in order to adjust P.H.